Sewing Tips - Make A Cutting Mat That Doesn't Slip

When you are sewing, rotary cutting mats are greattable.
for cutting with a rotary cutter. However, when youMore Sewing Tips
are cutting slippery fabrics, it is difficult to keep theRaise Your Table Legs
fabric where you want it.To help prevent back aches, raise your cutting table up
Here is a sewing tip on how you can make your ownhigher by placing tall cans like juice cans under each
non-slip cutting mat.leg. This helps tremendously.
Create A Cork Top TableIf you want to permanently raise the legs of your table
Use cork sheeting as a non-slip cutting mat when youand the legs are tubular, you might try PVC pipe. Put
are sewing and cutting silky, slippery fabrics or anytimecaps on the ends of the pipe or use casters to keep
you are cutting with dressmaker shears. The fabricthe legs from marking the floor.
doesn't move around like it does on the rotary mat.Steady Your Sewing and Overlock Machines
Poke your pins right into the cork to hold your fashionUse a square of cork sheeting under your
fabric. This is great for tracing patterns, too. Stabbingoverlock-serger or sewing machine to keep it from
the pins into the cork holds everything in place.moving around when you sew. This is also good on
Find cork sheeting at your local hardware store likethe floor to keep your foot pedal from sliding around.
Home Depot or Lowes. Wider widths are availableMake A Portable Cork Cutting Mat
there. Craft stores usually carry only narrow widths.Glue some cork sheeting to the backside of your small
Have the hardware store cut the cork to the size ofportable rotary cutting mat so you can take it with you
your cutting table.when you go to your sewing classes or travel. Then,
Draw vertical, horizontal and bias lines on it withyou will have both mats available when you need
permanent marker if you like. Glue a tape measurethem.
along the ends for quick measuring.Make A Cork Bulletin Board
Cork sheeting is flexible and lightweight. You can roll itMake a cork bulletin board to post your sewing notes,
up when not in use. Or, keep it on top of or under youretc. Recycle an old picture frame. Glue cork to a piece
rotary cutting mat so that it is handy when you need it.of cardboard and frame it.
It will keep the rotary mat from slipping on the table ifOr frame the cork with some trim from your stash or
you keep the cork under the rotary mat when not inglue measure tapes around it or old spools of thread.
use.It just makes sense!
Another idea is to use cork tiles to create a cork top