Slip Into Something New With Slipcovers, Make Your Own And Do It Right!

Making your own slipcovers for your chairs anddown and a ruler could be ill-suited for all the curves.
couches is a very inexpensive way of changing theUse a measuring tape instead. Write all the
overall look of your furniture for the better. Not only willmeasurements down on a piece of paper.
it give you enough elbow room when it comes to3. Using your measuring tape and chalk, try to draw
design, the savings that you'll get will definitely add up.the measurements on a large piece of paper which will
Slipcover basicsserve as your pattern when you transferring the
Initially, making slipcovers for your couch, loveseat,measurements on to the fabric. You may need to
recliners and dining chairs is relatively easy and at thekeep a close eye on your chair to get it right. For this
same time complicated. Choosing the fabrics andpart, you need not rush. Take your time and make
designs for them is the easy part, measuring andsure that you get all the measurements and curves
cutting the layout of the patterns from your fabric isright.
something else.4. After you have successfully made the layout that
Romina Abrigo Editor of the "Sewing Machines Forwill serve as a pattern for your fabric, you may now
Sale" website -- -- pointed out;proceed to cutting. Compare each part of the pattern
"…One very useful tip is choosing the fabric afterto the chair. This will ensure your accuracy.
measuring your chair and after you've finished cuttingOnce all the measurements are done, and the patterns
the layout. This is where your savings will add up. Ifare all accounted for, you can now proceed to
you know the exact measurements, getting the rightchoosing the perfect fabric and design for you chair.
size of the fabric will be a breeze, and you won't needFabric and design
to waste any during the cutting process…" AddedThe fabric that you plan to use for you slipcover must
Romina Abrigoaccentuate the entire ambience of your room. Various
Measuring tipsfabrics have their own unique designs and are readily
Since taking all the measurements of your couch is aavailable on the market today. Some of these fabrics
painstaking task and might consume more time thaninclude solids, prints, plush, toile, stripes and plaids. 
putting it all together, this is the most crucial part inYou need to consider the design of the fabric used
making your very own slipcover - one wrong slip andbefore you start cutting it up for your slipcovers.
you might end up wasting a lot of fabric.Those with patterns like stripes and plaids needs to be
Here are some very useful tips to make sure that youwell thought out since you don't want to look at your
get it right the first time around:chair and get a feel of slapdash or a messy design.
1. Assign a letter for every curve of your chair. PayingYou need to make sure that the pattern will fit the
attention to the details could simplify your workloadoverall design of both the slipcover and the sofa.
rather than complicate it.  Example: for an armchair, itsLay the fabric on the sofa to determine the location of
parts include the back rest (both front and back), armthe pattern on the chair. Once you think the pattern is
rest (both inside, outside and front), and the frontin the right place, you can now mark down the location
gusset. Assign a letter for the length and width ofand proceed with cutting the fabric using the pattern
each part.that you made earlier.
2. Measure your chair carefully. This is the most"…You might think that making your own slipcover is
important step in making your slipcover. A ruler wouldimpossible.
be useless for this task since most chairs are padded